headbg

ATEX LED Explosion-proof Grade Exd IIB T4 IP66 LED Street Lamp

Short Description:

Explosion-proof street lights, the highest explosion-proof grade of explosion-proof type, can be used safely in various flammable and explosive places. Heavy-duty enterprises used for dangerous production, construction of engineering street lights, explosion-proof street lights are designed for petrochemical, chemical, petroleum and other sites.


Product Detail

Product Tags

Parameter

Model TY/MLED601-TY/MLED602
Rated Power 20W/40W/50W/60W/70W/80W/100W/20W/150W
Working Voltage AC85-265V 50-60HZ
Power Factor 0.95
IP Grade IP67
Anti-corrosion Grade WF2
Color Temperature 5500K-6500K
Irradiation Angle 120°- 180°
Size 320*310mm
Introducing Device G3/4 inlet specification, suitable for φ8mm-φ11mm
Installation Height Different power can be installed at a height of 4.5 meters -40 meters
Ex Marking Exd IIB T4 Gb
Executive Standard GB3836.1/GB3836.2/IEC60079-0/IEC60079-1

Light Source

Rated Power(W)

Luminous Flux(Lm)

Life Span(h)

LED

40

5500

100000

LED

50

6600

100000

LED

60

7700

100000

LED

80

11000

100000

LED

100

13200

100000

LED

120

13200

100000

LED

150

16500

100000

LED

200

22000

100000

LED

300

33000

100000

LED

400

44000

100000

Features

  • Explosion-proof street lights are divided into: explosion-proof type d IIB level, d IIC level; increased safety type e II level. Applicable temperature range T2, T3, T4, T6, according to the explosion-proof area, choose different explosion-proof grades and corresponding temperature group grades of explosion-proof street lights.
  • Because most of the explosion-proof street lights are installed outdoors, it is very important when choosing explosion-proof street lights. First of all, the explosion-proof lamp holders and explosion-proof electrical boxes must reach the explosion-proof level.
  • The protection level must reach (IP) 54 or higher, the anti-corrosion level (WF) level 1 or higher, and the insulation level must be level 1.
  • Finally, a ground wire needs to be connected to the ground terminal outside the ballast.
  • The scope of use when metal halide lamps and sodium lamps are equipped with explosion-proof street lamps. Generally, the light emitted by metal halide lamps is white light and is mostly used in areas with less fog, while the light emitted by high-pressure sodium lamps is yellow light and is mostly used in foggy urban areas. The penetration of fog is relatively strong.

Application

11.2
oil factory
chemical factory
oil station

Summary

This product is strictly controlled in accordance with the ISO9001: 2000 international quality management system standard to ensure that the product quality is higher than the national standard and fully meets the design requirements. The product is guaranteed for 3 years (the light source is guaranteed for one year), within 3 years from the date of purchase , Any failure of the product under normal use will be maintained free of charge by our company. However, the shipping cost should be  paid by the buyer.


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us